Free triage guide and PDF

Email blocked, rate-limited or filtered? Find out which, then fix it

For: anyone holding a bounce they cannot read, a log full of "try again later", a "blocked by policy" refusal from one company, or a report that says delivered when the person never got it.

  • Nine steps to sort a block, a rate limit and a company filter, open on this page.
  • The line your bounce says, and what to do first for it.
  • The steps and both tables as a PDF you can print.

Send me the PDF

The cover of the PDF
PDF, 44 pages

The 60-second answer

A send came back with a code you do not recognise, or a contact says your email never arrived. Three different things look alike from the outside: a block, a rate limit, and a company's own mail filter. Each has a different fix. This guide shows how to tell which one you have, then what to do first for each. It is free and all of it is on this page.

  1. Read the first digit and the words. A 4xx with "rate limit exceeded" or "too many connections" means slow down and retry. A 5xx with "blocked" or "policy" means fix something first.

  2. A rate limit is a pause, not a block. Let your email marketing tool retry, slow the pace, and do not remove the address, because it is not a bad address.

  3. A company's own mail filter can hold your email with no bounce at all, or refuse it under a rule its IT team wrote. Either way, the fix starts with that team, not with more sending.

Every explanation on this page comes from the Email Almanac, our own library of more than 4,000 answers about email. You do not have to buy anything to read it.

Free PDF, 44 pages

Take the triage plan with you.

The nine steps, the three-situations table and the what-to-do-first table, as a PDF you can print.

We send the PDF to this address and nothing else unless you tick the box. Unsubscribe in one click, any time.
  1. You get one email.It comes from Review My Emails, with the PDF link inside.
  2. Your PDF is the whole plan.The nine steps, the three situations side by side and what to do first, ready to print.
  3. Nothing else, unless you ask.No newsletter unless you tick the box. Unsubscribe in one click, any time.

Which case are you?

Your refused email, under review.

Paste the whole message from your bounce log. The card puts it in one of three boxes and shows what to do first.

Answer here and your row lights up, with what to do first. The PDF has every row and the full guide.

No bounce, or the retries never cleared?

Read in your browser only. Nothing you paste is sent to us or stored.

Send under review

Example
Blocked
Rate-limited
Filtered

The reasoning, in plain English

Do this first

    The guide

    Sort it, then fix it, in 9 steps

    One line each. Tick them as you go. Open a step for the full explanation.

    0 of 9 done
    1. Read it and sort it

    2. 1

      Why:it often links to the receiver's own help page, the best place to go first.

      Read the full explanation

      Your email marketing tool's bounce log holds the full refusal. Copy the exact text. It usually carries a three-digit code, a short reason, and often a link to the receiver's own help page, which is the best place to go first. The words after the code tell you what rule fired. Do not guess.

    3. 2

      Why:a 5 means permanent, fix it first. A 4 means temporary, your tool should retry.

      Read the full explanation

      A 5 means permanent: fix the problem before you send again. A 4 means temporary: the receiver is saying "not right now", and your tool should retry. In the extended code, a 7 in the middle means security or policy. The words settle it. "421 too many connections" is a rate limit. "421 message rejected due to policy" is a policy refusal wearing a 4xx code.

    4. 3

      Why:Blocked, Rate-limited or Filtered. Each has a different fix.

      Read the full explanation

      Blocked: the receiver refused the message during the handover and you got a bounce. The mailbox exists and the server is fine. The refusal is about your mail (the IP, the domain, the content or the authentication) or about the receiving company's own rules. Rate-limited: a 4xx asking you to slow down and retry later. Nobody blocked you. Filtered: the message was accepted, then held in quarantine for an admin, or put in the spam folder. See the table below.

    5. The fix for each

    6. 4

      Why:do not re-send the same messages. That makes it worse.

      Read the full explanation

      Look for 421 or 452 with words like "Too many concurrent SMTP connections" or "Too many messages sent this hour". The fix is almost always to slow down and spread your sends, and most email marketing tools retry for you. Do not re-send the same messages. That makes it worse. At Microsoft, 421 RP-001 is the message-rate limit, RP-002 the rate limit on one connection, and RP-003 too many connections at once. Microsoft ties all three to your IP or domain reputation.

    7. 5

      Why:a deferral that keeps failing across 24 to 72 hours needs investigating.

      Read the full explanation

      Gmail's 421 4.7.28 means Gmail sees an unusual rate of mail, often unwanted mail, from you, so you are rate-limited harder. Pause, and check Google Postmaster Tools. A deferral that keeps failing across the whole retry window, usually 24 to 72 hours, needs investigating. For an established sender, a new rate limit is usually the first sign that reputation slipped. Look for the date delivery times started to stretch, and trace back what you sent around then.

    8. 6

      Why:DMARC fails when neither SPF nor DKIM passes and lines up with your From domain.

      Check your SPF recordCheck your DMARC recordThe SPF lookup limit guideThe email header guide

      Read the full explanation

      Gmail's 550-5.7.26 This message does not have authentication information means authentication failed. At Outlook, 5.7.509 is a DMARC failure: check SPF, DKIM and DMARC alignment before resending anything. DMARC fails when neither SPF nor DKIM passes and lines up with the From domain your reader sees. For the deep fix, read our guides "SPF permerror and the 10 lookup limit" and "Read an email header".

    9. 7

      Why:suppressing the address solves nothing. The same block hits every message to that server.

      Run the free blocklist checkThe blocklist guide

      Read the full explanation

      If the bounce names a blocklist or links to a lookup page, it is a listing you deal with directly. Read our guide "Listed on a blocklist? What to do now". At Microsoft, 5.7.606 means your sending IP is on a banned list, and you go through Microsoft's delisting process. Gmail's 550 5.7.1 is a reputation or content block, not a rate limit. Either way, suppressing the address solves nothing, because the same block hits every message you send to that server.

    10. 8

      Why:it is not a spam verdict on your content. Their admin has to change the rule or allow you.

      Read the full explanation

      "Blocked by policy", often with 5.7.1 or 5.7.0, means the receiving company wrote a rule that refused your message. It is not a spam verdict on your content. One policy bounce from one company does not mean you have a deliverability problem. No reputation work changes their rule. Their admin has to change it or allow you. Reach your contact another way, paste them the bounce, and give their IT team your sending domain, your sending IP range and your SPF and DKIM details.

    11. 9

      Why:quarantine sends no bounce, so your tool shows delivered.

      Read your headersThe going to spam guide

      Read the full explanation

      A company mail filter (a gateway) sits in front of the company's mail server and can quarantine, strip or block a message before any employee sees it. Quarantine sends no bounce, so your tool shows delivered while the message waits for an admin. Ask your contact directly, and make sure SPF, DKIM and DMARC all pass. If a bounce does come, read its raw headers for the filter's name, such as Proofpoint, Mimecast, Barracuda, Microsoft 365 Defender or Cisco IronPort, because each one has its own path to a fix. If the email reached the spam folder instead, read our guide "Your emails are going to spam".

    Your plan

    Answer the questions above, then tick the steps.

      Ask the free SOS line
      Capture not live yet. We send the plan and nothing else unless you ask.
      See every row of the table

      What you see, and what to do first

      What the message saysDo this first
      421 with "too many connections", "rate limit exceeded" or Microsoft's RP-001A rate limit. Slow the pace, let the retries run, and do not re-send
      Gmail 421 4.7.28Gmail sees an unusual rate of mail, often unwanted mail, from you. Pause and check Google Postmaster Tools
      451 4.7.1 "try again later"A temporary deferral that usually clears within minutes to hours. If it keeps happening over several days, look at reputation
      Still 4xx after 24 to 72 hours of retriesA persistent deferral. Investigate reputation at that provider
      Gmail 550-5.7.26Authentication failed. Check SPF, DKIM and DMARC. Our guide "SPF permerror and the 10 lookup limit" has the deep fix
      Outlook 5.7.509A DMARC failure. Check SPF, DKIM and DMARC alignment before resending
      5.7.1 that names a blocklist or carries a lookup linkA listing. Read our guide "Listed on a blocklist? What to do now"
      "Rejected by organization policy" or "blocked by recipient policy" from one companyThat company's own rule. Reach your contact another way and ask their IT team to allow you
      Delivered, no bounce, but your work contact never got itLikely held in quarantine. Ask your contact directly and check your authentication
      Delivered, and it sits in the spam folderNot a block, the message was accepted. Read our guide "Your emails are going to spam"
      Rule out a blocklist

      Have a bounce that names no list? Run the free blocklist check while you read, so you can rule one out.

      The three situations, side by side
      SituationWhat you seeDo this first
      BlockedA 5xx bounce such as 550 or 554, with words like "blocked", "rejected" or "policy"Find the cause before sending again. Retrying will not help
      Rate-limitedA 4xx such as 421, 450 or 451, with "rate limit exceeded", "too many connections" or "try again later"Slow down and let your email marketing tool retry
      Filtered by a company"Blocked by policy" from one company, or no bounce at all and no replyReach your contact another way and ask their IT team to allow you
      See how it plays out for a real business

      Worked example. Skipper Mako runs Pearl Diver Travel and sends the monthly newsletter from news@pearl-diver.example. On Monday the log shows two kinds of trouble. Most of it is 421 4.7.0 Too many concurrent SMTP connections at one big provider. That is a rate limit, so Skipper spreads the rest of the send over the day and lets the retries run. The other line comes from Saltmarsh Outfitters: 550 5.7.1 Message rejected by organization policy. That is a rule the company wrote, not a verdict on the newsletter. Skipper calls the contact there, who passes the bounce to Phil Terr, who runs the company's mail filter. Phil asks for the sending domain, the sending IP range and the SPF and DKIM details, so Skipper runs the free SPF checker first, because an admin who finds broken records is less likely to allow you. Nobody comes off the newsletter list. A 421 is not a bad address, and suppressing an address does not lift a block.

      Who we are

      About Review My Emails

      Review My Emails is email list cleaning and validation that tells you which addresses to keep, which to watch and which to stop sending to, and why.

      Most checkers answer one question: does this address exist? We answer the next one: should you send to it? An address can be perfectly valid and still be quietly damaging your sender reputation. Valid is not safe.

      The company was founded in 2020 and is based in Bolton, United Kingdom. Our founder is Yanna-Torry Aspraki, an email deliverability specialist who has worked in deliverability since 2015.

      Your next step. Use the free tools to find the cause: the email header analyzer (reviewmyemails.com/tools/email-headers), the SPF checker (reviewmyemails.com/tools/spf-checker), the DMARC checker (reviewmyemails.com/tools/dmarc-checker) and the blocklist check (reviewmyemails.com/tools/blacklist-checker). Not sure which of the three you have, or the deferrals will not clear? Ask the free SOS line at reviewmyemails.com/sos. A real person answers, with no pitch.

      List cleaning does not fix SPF, DMARC, MX or blocklist problems. Those live in your sending setup, and they are a different job. A blocklist listing measures your sending, so it is never a reason to suppress anyone on your list. And nobody can promise you the inbox, so we do not.

      Yanna-Torry Aspraki, Review My Emails

      Email SOS Hotline, free

      Stuck? We are here.

      For those problems there is the Email SOS Hotline, our free help line. Tell Yanna-Torry what is going on and she will tell you what she would do. She reads every message herself and replies within 48 to 72 hours, with no pitch.

      Ask the free SOS line
      The cover of the PDF

      Free PDF, 44 pages

      Want this as a PDF?

      Same steps, with both tables.

      We send the PDF to this address and nothing else unless you tick the box. Unsubscribe in one click, any time.
      Words used
      Rate limiting
      a receiving server refusing more mail from your IP for a while, with a 421 or 451, telling you to retry later
      Deferral (4xx)
      a temporary refusal. The message waits in the queue and is retried, usually for 24 to 72 hours
      Block bounce
      a refusal aimed at the sender, even though the mailbox exists and the server is fine
      Policy filter
      rules a receiving company wrote, such as no zip files, or no outside mail to the executive mailing list
      Gateway (secure email gateway)
      a security layer in front of a company's mail server that checks every incoming message first
      Quarantine
      the message is accepted but held for an admin to review, so the reader may never see it
      Allow list (whitelist)
      an admin marking your sending domain or IP as trusted, so it gets less filtering
      Where this came from: the Review My Emails Email Almanac.
      Review My EmailsTrust beats tactics™

      Founded in 2020, based in Bolton, United Kingdom.

      reviewmyemails.com/resources/email-blocked-or-rate-limited?c=web-p10-r10pdf · v1

      Spotted something out of date?